February 10, 1998
CIRCULAR NO. A-119
Revised
MEMORANDUM FOR HEADS OF EXECUTIVE DEPARTMENTS AND AGENCIES
Revised OMB CircularA-119 establishes
policies on Federal use and development of voluntary consensus
standards and on
conformity assessment activities. Pub. L. 104-113, the "National
Technology Transfer and Advancement Act of 1995," codified existing
policies in A-119, established reporting requirements, and authorized the
National Institute of Standards and Technology to coordinate conformity
assessment activities of the agencies. OMB is issuing this revision of
the Circular in order to make the terminology of the Circular consistent
with the National Technology Transfer and Advancement Act of 1995, to
issue guidance to the agencies on making their reports to OMB, to direct
the Secretary of Commerce to issue policy guidance for conformity
assessment, and to make changes for clarity.
Franklin D. Raines
TABLE OF CONTENTS
BACKGROUND
1. What Is The Purpose Of This Circular?
DEFINITIONS OF STANDARDS
3. What Is A Standard?
4. What Are Voluntary, Consensus Standards?
POLICY
5. Who Does This Policy Apply To?
6. What Is The Policy For Federal Use Of Standards?
7. What Is The Policy For Federal Participation In Voluntary
Consensus Standards Bodies?
MANAGEMENT AND REPORTING OF STANDARDS USE
9. What Is My Agency Required To Report?
10. How Does My Agency Manage And Report On Its Development
and Use Of Standards?
11. What Are The Procedures For Reporting My Agency's
Use Of Standards In Regulations?
12. What Are The Procedures For Reporting My Agency's
Use Of Standards In Procurements?
AGENCY RESPONSIBILITIES
13. What Are The Responsibilities Of The Secretary Of
Commerce?
14. What Are The Responsibilities Of The Heads Of
Agencies?
15. What Are The Responsibilities Of Agency Standards
Executives?
SUPPLEMENTARY INFORMATION
16. When Will This Circular Be Reviewed?
17. What Is The Legal Effect Of This Circular?
18. Do You Have Further Questions?
BACKGROUND
1. What Is The Purpose Of This Circular?
This Circular establishes policies to improve the internal management of
the Executive
Branch. Consistent with Section 12(d) of P.L. 104-113, the "National
Technology
Transfer and Advancement Act of 1995" (hereinafter "the
Act"), this
Circular directs agencies to use voluntary consensus standards in lieu of
government-unique standards except where inconsistent with law or
otherwise impractical.
It also provides guidance for agencies participating in voluntary
consensus standards
bodies and describes procedures for satisfying the reporting requirements
in the Act. The
policies in this Circular are intended to reduce to a minimum the
reliance by agencies on
government-unique standards. These policies do not create the bases for
discrimination in
agency procurement or regulatory activities among standards developed in
the private
sector, whether or not they are developed by voluntary consensus
standards bodies.
Consistent with Section 12(b) of the Act, this Circular directs the
Secretary of Commerce
to issue guidance to the agencies in order to coordinate conformity
assessment activities.
This Circular replaces OMB Circular No. A-119, dated October 20, 1993.
2. What Are The Goals Of The Government In Using
Voluntary Consensus Standards?
Many voluntary consensus standards are appropriate or adaptable for the
Government's
purposes. The use of such standards, whenever practicable and
appropriate, is intended to
achieve the following goals:
a. Eliminate the cost to the Government of developing its own standards
and decrease the
cost of goods procured and the burden of complying with agency
regulation.
b. Provide incentives and opportunities to establish standards that
serve national
needs.
c. Encourage long-term growth for U.S. enterprises andpromote efficiency
and economic
competition through harmonization of standards.
d. Further the policy of reliance upon the private sector to supply
Government needs for
goods and services.
WHAT DEFINITIONS OF STANDARDS
b. The term "standard" does not include the following:
(1) Professional standards of personal conduct.
(2) Institutional codes of ethics.
c. "Performance standard" is a standard as defined above
that states
requirements in terms of required results with criteria for verifying
compliance but
without stating the methods for achieving required results. A performance
standard may
define the functional requirements for the item, operational
requirements, and/or
interface and interchangeability characteristics. A performance standard
may be viewed in
juxtaposition to a prescriptive standard which may specify design
requirements, such as
materials to be used, how a requirement is to be achieved, or how an item
is to be
fabricated or constructed.
d. "Non-government standard" is a standard as defined above
that is in the form
of a standardization document developed by a private sector association,
organization or
technical society which plans, develops, establishes or coordinates
standards,
specifications, handbooks, or related documents.
(1) "Non-consensus standards," "Industry
standards," "Company
standards," or "de facto standards," which are developed
in the private
sector but not in the full consensus process.
(2) "Government-unique standards," which are developed by the
government for its
own uses.
(3) Standards mandated by law, such as those contained in the United
States Pharmacopeia
and the National Formulary, as referenced in 21 U.S.C. 351.
POLICY
a. When must my agency use voluntary consensus
standards?
Your agency must use voluntary consensus standards, both domestic and
international, in
its regulatory and procurement activities in lieu of government-unique
standards, unless
use of such standards would be inconsistent with applicable law or
otherwise impractical.
In all cases, your agency has the discretion to decline to use existing
voluntary
consensus standards if your agency determines that such standards are
inconsistent with
applicable law or otherwise impractical.
(1) "Use" means incorporation of a standard in whole,
in part, or by
reference for procurement purposes, and the inclusion of a
standard in whole, in
part, or by reference in regulation(s).
(2) "Impractical" includes circumstances in which such use
would fail to serve
the agency's program needs; would be infeasible; would be inadequate,
ineffectual,
inefficient, or inconsistent with agency mission; or would impose more
burdens, or would
be less useful, than the use of another standard.
b. What must my agency do when such use is determined by my agency to be inconsistent with applicable law or otherwise impractical?
The head of your agency must transmit to the Office of Management and
Budget (OMB),
through the National Institute of Standards and Technology (NIST), an
explanation of the
reason(s) for using government-unique standards in lieu of voluntary
consensus standards.
For more information on reporting, see section 9.
c. How does this policy affect my agency's regulatory authorities and
responsibilities?
This policy does not preempt or restrict agencies' authorities and
responsibilities to
make regulatory decisions authorized by statute. Such regulatory
authorities and
responsibilities include determining the level of acceptable risk;
setting the level of
protection; and balancing risk, cost, and availability of technology in
establishing
regulatory standards. However, to determine whether established
regulatory limits or
targets have been met, agencies should use voluntary consensus standards
for test methods,
sampling procedures, or protocols.
d. How does this policy affect my agency's procurement
authority?
This policy does not preempt or restrict agencies' authorities and
responsibilities to
identify the capabilities that they need to obtain through procurements.
Rather, this
policy limits an agency's authority to pursue an identified capability
through reliance on
a government-unique standard when a voluntary consensus standard exists
(see Section 6a).
e. What are the goals of agency use of voluntary consensus
standards?
Agencies should recognize the positive contribution of standards
development and related
activities. When properly conducted, standards development can increase
productivity and
efficiency in Government and industry, expand opportunities for
international trade,
conserve resources, improve health and safety, and protect the
environment.
f. What considerations should my agency make when it is
considering using a
standard?
When considering using a standard, your agency should take full account
of the effect of
using the standard on the economy, and of applicable federal laws and
policies, including
laws and regulations relating to antitrust, national security, small
business, product
safety, environment, metrication, technology development, and conflicts
of interest. Your
agency should also recognize that use of standards, if improperly
conducted, can suppress
free and fair competition; impede innovation and technical progress;
exclude safer or less
expensive products; or otherwise adversely affect trade, commerce,
health, or safety. If
your agency is proposing to incorporate a standard into a proposed or
final rulemaking,
your agency must comply with the "Principles of Regulation"
(enumerated in
Section 1(b)) and with the other analytical requirements of Executive
Order 12866,
"Regulatory Planning and Review."
g. Does this policy establish a preference between consensus
and non-consensus
standards that are developed in the private sector?
This policy does not establish a preference among standards developed in
the private
sector. Specifically, agencies that promulgate regulations referencing
non-consensus
standards developed in the private sector are not required to report on
these actions, and
agencies that procure products or services based on non-consensus
standards are not
required to report on such procurements. For example, this policy allows
agencies to
select a non-consensus standard developed in the private sector as a
means of establishing
testing methods in a regulation and to choose among
commercial-off-the-shelf products,
regardless of whether the underlying standards are developed by voluntary
consensus
standards bodies or not.
h. Does this policy establish a preference between domestic and
international
voluntary consensus standards?
This policy does not establish a preference between domestic and international voluntary consensus standards. However, in the interests of promoting trade and implementing the provisions of international treaty agreements, your agency should consider international standards in procurement and regulatory applications.
i. Should my agency give preference to performance standards?
In using voluntary consensus standards, your agency should give preference to performance standards when such standards may reasonably be used in lieu of prescriptive standards.
j. How should my agency reference voluntary consensus
standards?
Your agency should reference voluntary consensus standards, along with
sources of
availability, in appropriate publications, regulatory orders, and related
internal
documents. In regulations, the reference must include the date of
issuance. For all other
uses, your agency must determine the most appropriate form of reference,
which may exclude
the date of issuance as long as users are elsewhere directed to the
latest issue. If a
voluntary standard is used and published in an agency document, your
agency must observe
and protect the rights of the copyright holder and any other similar
obligations.
k. What if no voluntary consensus standard exists?
In cases where no voluntary consensus standards exist, an agency may use
government-unique
standards (in addition to other standards, see Section 6g) and is not
required to file a
report on its use of government-unique standards. As explained above (see
Section 6a), an
agency may use government-unique standards in lieu of voluntary consensus
standards if the
use of such standards would be inconsistent with applicable law or
otherwise impractical;
in such cases, the agency must file a report under Section 9a regarding
its use of
government-unique standards.
l. How may my agency identify voluntary consensus standards?
Your agency may identify voluntary consensus standards through databases
of standards
maintained by the National Institute of Standards and Technology (NIST),
or by other
organizations including voluntary consensus standards bodies, other
federal agencies, or
standards publishing companies.
7. What Is The Policy For Federal
Participation In Voluntary
Consensus Standards Bodies?
Agencies must consult with voluntary consensus standards bodies, both
domestic and
international, and must participate with such bodies in the development
of voluntary
consensus standards when consultation and participation is in the public
interest and is
compatible with their missions, authorities, priorities, and budget
resources.
a. What are the purposes of agency participation?
Agency representatives should participate in voluntary consensus
standards activities in
order to accomplish the following purposes:
(1) Eliminate the necessity for development or maintenance of separate
Government-unique standards.
(2) Further such national goals and objectives as increased use of the
metric system of
measurement; use of environmentally sound and energy efficient materials,
products,
systems, services, or practices; and improvement of public health and
safety.
b. What are the general principles that apply to agency support?
Agency support provided to a voluntary consensus standards activity must be limited to that which clearly furthers agency and departmental missions, authorities, priorities, and is consistent with budget resources. Agency support must not be contingent upon the outcome of the standards activity. Normally, the total amount of federal support should be no greater than that of other participants in that activity, except when it is in the direct and predominant interest of the Government to develop or revise a standard, and its timely development or revision appears unlikely in the absence of such support.
c. What forms of support may my agency provide?
The form of agency support, may include the following:
(1) Direct financial support; e.g., grants, memberships, and contracts.
(2) Administrative support; e.g., travel costs, hosting of meetings,
and secretarial
functions.
(3) Technical support; e.g., cooperative testing for standards evaluation and
participation of agency personnel in the activities of voluntary
consensus standards
bodies.
(4) Joint planning with voluntary consensus standards bodies to promote
the identification
and development of needed standards.
(5) Participation of agency personnel.
d. Must agency participants be authorized?
Agency employees who, at Government expense, participate in standards
activities of
voluntary consensus standards bodies on behalf of the agency must do so
as specifically
authorized agency representatives. Agency support for, and participation
by agency
personnel in, voluntary consensus standards bodies must be in compliance
with applicable
laws and regulations. For example, agency support is subject to legal and
budgetary
authority and availability of funds. Similarly, participation by agency
employees (whether
or not on behalf of the agency) in the activities of voluntary consensus
standards bodies
is subject to the laws and regulations that apply to participation by
federal employees in
the activities of outside organizations. While we anticipate that
participation in a
committee that is developing a standard would generally not raise
significant issues,
participation as an officer, director, or trustee of an organization
would raise more
significant issues. An agency should involve its agency ethics officer,
as appropriate,
before authorizing support for or participation in a voluntary consensus
standards body.
e. Does agency participation indicate endorsement of any
decisions reached by
voluntary consensus standards bodies?
Agency participation in voluntary consensus standards bodies does not
necessarily connote
agency agreement with, or endorsement of, decisions reached by such
organizations.
f. Do agency representatives participate equally with other members?
Agency representatives serving as members of voluntary consensus standards bodies should participate actively and on an equal basis with other members, consistent with the procedures of those bodies, particularly in matters such as establishing priorities, developing procedures for preparing, reviewing, and approving standards, and developing or adopting new standards. Active participation includes full involvement in discussions and technical debates, registering of opinions and, if selected, serving as chairpersons or in other official capacities. Agency representatives may vote, in accordance with the procedures of the voluntary consensus standards body, at each stage of the standards development process unless prohibited from doing so by law or their agencies.
g. Are there any limitations on participation by agency representatives?
In order to maintain the independence of voluntary consensus standards bodies, agency representatives must refrain from involvement in the internal management of such organizations (e.g., selection of salaried officers and employees, establishment of staff salaries, and administrative policies). Agency representatives must not dominate such bodies, and in any case are bound by voluntary consensus standards bodies' rules and procedures, including those regarding domination of proceedings by any individual. Regardless, such agency employees must avoid the practice or the appearance of undue influence relating to their agency representation and activities in voluntary consensus standards bodies.
h. Are there any limits on the number of federal participants in voluntary consensus standards bodies?
The number of individual agency participants in a given voluntary standards activity should be kept to the minimum required for effective representation of the various program, technical, or other concerns of federal agencies.
i. Is there anything else agency representatives should know?
This Circular does not provide guidance concerning the internal
operating procedures
that may be applicable to voluntary consensus standards bodies
because of their
relationships to agencies under this Circular. Agencies should, however,
carefully
consider what laws or rules may apply in a particular instance because of
these
relationships. For example, these relationships may involve the Federal
Advisory Committee
Act, as amended (5 U.S.C. App. I), or a provision of an authorizing
statute for a
particular agency.
j. What if a voluntary consensus standards body is likely to
develop an
acceptable, needed standard in a timely fashion?
If a voluntary consensus standards body is in the process of developing
or adopting a
voluntary consensus standard that would likely be lawful and practical
for an agency to
use, and would likely be developed or adopted on a timely basis, an
agency should not be
developing its own government-unique standard and instead should be
participating in the
activities of the voluntary consensus standards body.
8. What Is The Policy On Conformity
Assessment?
Section 12(b) of the Act requires NIST to coordinate Federal, State, and
local standards
activities and conformity assessment activities with private sector
standards activities
and conformity assessment activities, with the goal of eliminating
unnecessary duplication
and complexity in the development and promulgation of conformity
assessment requirements
and measures. To ensure effective coordination, the Secretary of Commerce
must issue
guidance to the agencies.
MANAGEMENT AND REPORTING OF STANDARDS USE
9. What Is My Agency Required to Report?
a. As required by the Act, your agency must report to NIST, no later
than December 31
of each year, the decisions by your agency in the previous fiscal year to use
government-unique standards in lieu of voluntary consensus standards. If
no voluntary
consensus standard exists, your agency does not need to report its use of
government-unique standards. (In addition, an agency is not required to
report on its use
of other standards. See Section 6g.) Your agency must include an
explanation of the
reason(s) why use of such voluntary consensus standard would be
inconsistent with
applicable law or otherwise impractical, as described in Sections 11b(2),
12a(3), and
12b(2) of this Circular. Your agency must report in accordance with
format instructions
issued by NIST.
b. Your agency must report to NIST, no later than December 31 of each
year, information on
the nature and extent of agency participation in the development and use
of voluntary
consensus standards from the previous fiscal year. Your agency must
report in accordance
with format instructions issued by NIST. Such reporting must include the
following:
(1) The number of voluntary consensus standards bodies in which there is
agency
participation, as well as the number of agency employees participating.
(2) The number of voluntary consensus standards the agency has
used since the
last report, based on the procedures set forth in sections 11 and 12 of
this Circular.
(3) Identification of voluntary consensus standards that have been
substituted for
government-unique standards as a result of an agency review under section
15b(7) of this
Circular.
(4) An evaluation of the effectiveness of this policy and recommendations
for any changes.
c. No later than the following January 31, NIST must transmit to OMB a
summary report of
the information received.
10. How Does My Agency Manage And Report Its Development and Use Of Standards?
Your agency must establish a process to identify, manage, and review your agency's development and use of standards. At minimum, your agency must have the ability to (1) report to OMB through NIST on the agency's use of government-unique standards in lieu of voluntary consensus standards, along with an explanation of the reasons for such non-usage, as described in section 9a, and (2) report on your agency's participation in the development and use of voluntary consensus standards, as described in section 9b. This policy establishes two ways, category based reporting and transaction based reporting, for agencies to manage and report their use of standards. Your agency must report all uses of standards in one or both ways.
11. What Are The Procedures For Reporting My Agency's Use Of Standards In Regulations?
Your agency should use transaction based reporting if your agency issues regulations that use or reference standards. If your agency is issuing or revising a regulation that contains a standard, your agency must follow these procedures:
a. Publish a request for comment within the preamble of a Notice of Proposed Rulemaking (NPRM) or Interim Final Rule (IFR). Such request must provide the appropriate information, as follows:
(1) When your agency is proposing to use a voluntary consensus standard, provide a statement which identifies such standard.
(2) When your agency is proposing to use a government-unique standard in lieu of a voluntary consensus standard, provide a statement which identifies such standards and provides a preliminary explanation for the proposed use of a government-unique standard in lieu of a voluntary consensus standard.
(3) When your agency is proposing to use a government-unique standard, and no voluntary consensus standard has been identified, a statement to that effect and an invitation to identify any such standard and to explain why such standard should be used.
b. Publish a discussion in the preamble of a Final Rulemaking that
restates the
statement in the NPRM or IFR, acknowledges and summarizes any comments
received and
responds to them, and explains the agency's final decision. This
discussion must provide
the appropriate information, as follows:
(1) When a voluntary consensus standard is being used, provide a
statement that identifies
such standard and any alternative voluntary consensus standards which
have been
identified.
(2) When a government-unique standard is being used in lieu of a
voluntary consensus
standard, provide a statement that identifies the standards and explains
why using the
voluntary consensus standard would be inconsistent with applicable law or
otherwise
impractical. Such explanation must be transmitted in accordance with the
requirements of
Section 9a.
(3) When a government-unique standard is being used, and no voluntary
consensus standard
has been identified, provide a statement to that effect.
(2) Systematically review your agency's use of government-unique standards for conversion to voluntary consensus standards.
(3) Maintain records on the groups or categories in which your agency uses
government-unique standards in lieu of voluntary consensus standards,
including an
explanation of the reasons for such use, which must be transmitted
according to Section
9a.
(4) Enable potential offerors to suggest voluntary consensus standards
that can replace
government-unique standards.
b. How does my agency report the use of standards in
procurements on a
transaction basis?
Your agency should report on a transaction basis when your agency
identifies, manages, and
reviews the use of standards on a transaction basis rather than a
category basis.
Transaction based reporting is especially useful when your agency
conducts procurement
mostly through commercial products and services, but is occasionally
involved in a
procurement involving government-unique standards. To report use of
government-unique
standards on a transaction basis, your agency must follow the following
procedures:
(1) In each solicitation which references government-unique standards,
the solicitation
must:
(i) Identify such standards.
(ii) Provide potential offerors an opportunity to suggest alternative
voluntary consensus
standards that meet the agency's requirements.
(2) If such suggestions are made and the agency decides to use
government-unique standards
in lieu of voluntary consensus standards, the agency must explain in its
report to OMB as
described in Section 9a why using such voluntary consensus standards is
inconsistent with
applicable law or otherwise impractical.
c. For those solicitations that are for commercial-off-the-shelf products
(COTS), or for
products or services that rely on voluntary consensus standards or
non-consensus standards
developed in the private sector, or for products that otherwise do not
rely on
government-unique standards, the requirements in this section do not
apply.
AGENCY RESPONSIBILITIES
d. Transmit the annual report prepared by the Agency Standards
Executive as described
in Sections 9 and 15b(6).
15. What Are The Responsibilities Of Agency
Standards Executives?
An Agency Standards Executive:
a. Promotes the following goals:
(1) Effective use of agency resources and participation.
(2) The development of agency positions that are in the public
interest and that do not
conflict with each other.
(3) The development of agency positions that are consistent with
administration policy.
(4) The development of agency technical and policy positions that are
clearly defined and
known in advance to all federal participants on a given committee.
b. Coordinates his or her agency's participation in voluntary consensus
standards bodies
by:
(1) Establishing procedures to ensure that agency representatives who participate in voluntary consensus standards bodies will, to the extent possible, ascertain the views of the agency on matters of paramount interest and will, at a minimum, express views that are not inconsistent or in conflict with established agency views.
(2) To the extent possible, ensuring that the agency's participation
in voluntary
consensus standards bodies is consistent with agency missions,
authorities, priorities,
and budget resources.
(3) Ensuring, when two or more agencies participate in a given voluntary
consensus
standards activity, that they coordinate their views on matters of
paramount importance so
as to present, whenever feasible, a single, unified position and, where
not feasible, a
mutual recognition of differences.
(4) Cooperating with the Secretary in carrying out his or her
responsibilities under this
Circular.
(5) Consulting with the Secretary, as necessary, in the development and
issuance of
internal agency procedures and guidance implementing this Circular,
including the
development and implementation of an agency-wide directory identifying
agency employees
participating in voluntary consensus standards bodies and the
identification of voluntary
consensus standards bodies.
(6) Preparing, as described in Section 9, a report on uses of
government-unique standards
in lieu of voluntary consensus standards and a report on the status of
agency standards
policy activities.
(7) Establishing a process for ongoing review of the agency's use of
standards for
purposes of updating such use.
(8) Coordinating with appropriate agency offices (e.g., budget and
legal offices) to
ensure that effective processes exist for the review of proposed agency
support for, and
participation in, voluntary consensus standards bodies, so that agency
support and
participation will comply with applicable laws and regulations.
SUPPLEMENTARY INFORMATION
17. What Is The Legal Effect Of This
Circular?
Authority for this Circular is based on 31 U.S.C. 1111, which gives OMB
broad authority to
establish policies for the improved management of the Executive Branch.
This Circular is
intended to implement Section 12(d) of P.L. 104-113 and to establish
policies that will
improve the internal management of the Executive Branch. This Circular is
not intended to
create delay in the administrative process, provide new grounds for
judicial review, or
create new rights or benefits, substantive or procedural, enforceable at
law or equity by
a party against the United States, its agencies or instrumentalities, or
its officers or
employees.
18. Do You Have Further Questions?
For information concerning this Circular, contact the Office of Management and Budget, Office of Information and Regulatory Affairs: Telephone 202/395-3785.
The Budget Legislative Information Management Reform/GPRA Grants Management Financial Management Procurement Policy Information & Regulatory Policy Contact the White House Web Master